ảnh đẹp thủy điện

Chùm ảnh 3D siêu đẹp về công trình thủy điện 
( chú ý là k phải ở VN  )





This is a spline for a large dam wall and one of the spillways with flowing water. The wet spillway is a spline with the water effect applied as a fixed object placed separately at the base of the spillway (splines do not support smoke/spray effects). 
A second spillway spline with the spillway gates closed, is included as an alternative addon. The dam wall has lights. 
The dam also has an intake structure as a spline that can be placed in the water behind the dam, with length and height adjustable. 
A rail track may be laid across the top of the dam wall if desired.






This shows the two types of gates on the spillway splines, the nearer ones are closed, and create a dry spillway. The splines easily join to each other so you can mix the two types of spillway with the main wall spline.
To place water at different levels in Trainz Surveyor, the separate water bodies must be separated by at least oone grid spacing (10 metres). The dam wall is sufficiently thick to allow this to occur, if placed on a grid line.
If the water levels cannot be separated, look under the ground to see if the water bodies have been joined together (ues wire fram mode in Surveyor). 





The intake tower is a spline structure, and can be easily placed, extended and the height varied to suit the water depth in the dam.











A separate rail track may be placed across the dam wall and spillways by aligning and raising the level of the track nodes. You may need to place a node in the track at the centre of the dam wall, so the height can be adjusted at that point (or the spline will follow the ground levels). Roads may also be placed for traffic to cross the dam wall. 
The water intake tower can be seen in the background.




A QR train using the track across the dam wall. 
Track is not part of the top of the wall - place any track you choose separately, or leave it plain concrete.






The pipeline spline (in background) feeds the power station, and the electrical switch yard has a number of separate transformers placed. You may choose from 8 different transformer types. One transformer has electrical sound added. The switch yard also has connecting wires to the Auran HT pylons and the ordinary LT power transmission wires. 
The building has night lights and sound. 
The station switching yard is created by placing the separate transformers and connection power wiring separately. The wire fence and gates are also separate splines. 





A close up of the larger power switchyard. The concrete base slab is offered in two spline forms, one 2.5 metres wide and one 10 metres wide for easy placement. The 10 metre wide version has perimeter lights that show up at night, as does the concrete slab. The chain wire fence is a spline and there is a spline of overhead wires and supports for easy placement.




The connection to the standard power transmission wires is a single mocrossing object. A similar connection is available for the HT Pylons. The insulator frame is placed in or near the switchyard and the Auran Pylon spline or power line spline is connected to the objects pylons or power poles.






View of the wider concrete slab spline (10 metres)with night lighting. This shows two such slabs placed side by side, and the lights then also appear between the two slabs. The slabs light up with pools of light at night. 
A similar wide slab is available without the lighting, and a narrow slab (2.5 metres) can be used as a path. 
A wire fence surround can be placed separately.



The water outlet from the power station, as a single object with water spray effects and sound. Multiple outlets may be placed side by side and overlapping.






Power generating station and adjacent switchyard, using the smaller concrete slab without lights attached, set in scenery.
This is a close up of the switch yard. Eight transformers are provided for variety, individually placed.





The concrete tail race spline are placed at the foot of the wall. Wet and dry splines can be used to protect the downstream area of the dam from water errosion. 





An additional picnic area that includes a parking lot, tables and barbecues can be placed as a fixed object. The sign in the car park can be changed to show the dam name.
Vehicles are available separately on the Download Station. 




A view of the excellent hand operated trolley by The Cowboy, inspecting the track on top of the dam. The trolley is a driveable object available on the Auran Download Station by The Cowboy. Refer to his website for details of other quality models: 






A view in the foreground of the exceptional waterfall offered by Sirgibby. The textures included in his waterfall pack are extremely realistic, and easy to use. Additional river spline and texture packs are available from his download site, all as payware. 
His site also has other exceptional freeware rolling stock and models for logging operations